Reports

AI-powered well analysis

Well Summary

Complete overview of a single well's performance and trends

Trend Analysis

Identify long-term patterns in water levels and flow rates

Anomaly Detection

Flag unusual readings that may indicate problems

Annual Summary

Year-end overview of your wells and water usage

Automatic Record Flagging

When a new well record is saved, the system automatically compares it against the well's historical data. If a reading looks unusual — a sudden drop in GPM, a spike in drawdown, or PSI outside normal range — you'll see a warning on the well page with details about what looks off and why.

Sample Report

Well Summary — Demo Well 1

Generated by Claude AI · Example report

Well Performance Summary
Over the monitoring period, this well has maintained consistent static water levels between 380–410 feet, with quarterly variation within normal range for the Sulphur Springs Valley basin.
Flow Rate: Averaged 342 GPM across all visits. The most recent reading of 360 GPM is within 5% of the 2-year average, indicating stable pump performance.
Drawdown: Current drawdown of 57 feet represents 14% of the static level — well within the acceptable range. No signs of aquifer stress detected.
Notable Observations:- Static level has declined approximately 8 feet over the past 18 months, consistent with regional trends- GPM has remained stable, suggesting the pump and column pipe are in good condition- PSI readings are consistent; no pressure anomalies detected
Recommendation: Continue quarterly monitoring. Consider a pump efficiency test if GPM drops below 280 GPM at next check.

In your portal, AI reports are generated from your actual well data and update automatically when new readings are added.